Soyuz Capsule Mesh

No updates for a while, but there are some new one to go in!

I recently bought a Russian Soyuz capsule mesh on TurboSquid. The textures didn’t really come in at all, (not unusual in my experience), but it was fairly straightforward to apply new ones, as surfaces were sensibly named. I was also really pleased to see that the orange seams were done with geometry!

Here are a couple of new renders, where I composited the mesh over Earth, using NASA photos taken from the ISS.

As usual, all of this is done in Lightwave 3D.soyuz-ascendingx

Continue reading “Soyuz Capsule Mesh”

Mercury Redstone Rocket – Nearly done?

After some work on the base, (thanks to better references), cutting details into the lower hull, and adding a reflection gradient on the paint, I think this one may be done… The Mercury Redstone definitely fills a gap in my historic rockets line up.

It feels like I am on a bit of a roll with the rockets recently!

Now I just need to make some final renders to wrap things up.

Redstone Rocket
Redstone Rocket

Redstone Rocket

Redstone Rocket

Continue reading “Mercury Redstone Rocket – Nearly done?”

Mercury capsule, texturing and clean-up

I’m currently sorting out surfaces for this Mercury capsule. But even so I thought it was good enough for a first shot at a finished render…

For those who don’t know, (is there anyone?) the Mercury program was the USA’s first manned spaceflight project, with a capsule capable of holding a single astronaut. The first few launches were sub-orbital. Astronaut control was limited, leading to Chuck Yaeger’s famous remark that the pilots were more like “spam in a can”.

It was a difficult time, as the US struggled to catch up with the early lead set by the Soviet Union.

And here are some more basic renders too.

Mercury Capsule
Mercury Capsule

Continue reading “Mercury capsule, texturing and clean-up”

Ariane 1, texturing continues.

I’ve been working on surfacing the Ariane 1 rocket, and  I think it’s nearly there. I found a few problems where the textures were rotated with reference to the geometry,

Some of the rings on the payload fairing are not quite right, but I am finding it hard to work out how to correct them.

araina-ortho-setx

Above is an orthographic set. (Perspective free) Continue reading “Ariane 1, texturing continues.”

Ariane 1 Rocket

My new work in progress.

This is the Ariane 1 rocket. I’m using a bought mesh for the geometry. It was converted from 3D studio, and is VERY heavy on the polygon count. But the good news is that the detail is superb, even the internal structure of the stringers is modeled.

Surfaces did not come in very clean, so I’m working through them to get them a bit more realistic. Still a long way to go with that.

ariane_ortho-set ariane_rgb0120 Continue reading “Ariane 1 Rocket”

Unused Space Odyssey Design Concept, Discovery Bowl Version

This is an alternate design for the ship “Discovery” from the film 2001. In my view it is much inferior to the final version, but this is interesting. This one tends to self-shadow a lot for one thing, which makes it difficult to light. But note that the habitation sphere is identical to the final version used in the film – this element was about the only constant factor in the many design changes.

It is based on sketches in Chris Frayling’s excellent book “The 2001 Files”, and my version incorporates elements from several sketches.

I also did a turntable video of it, to show off the shape.

From other sketches it is clear that there are 48 fuel tanks just under the widest part of the vehicle.

Continue reading “Unused Space Odyssey Design Concept, Discovery Bowl Version”

Latest WIP, more alternate “2001 A Space Odyssey” designs.

Now working on alternate unused designs for the 2001 Discovery, of which there were many. This one is fairly close to the finished version, but had added tension cables (helpful), and large cooling vanes (essential).

The vanes can tip – this would presumably be so they can stay edge on to the Sun, to avoid overheating.

Credible design for the craft like “Discovery” in “2001, A Space Odyssey” was considered very important, but the cooling vanes looked too much like wings, and were therefore dropped.

vanes-cables-01-0060 vanes-cables-01-0090

Continue reading “Latest WIP, more alternate “2001 A Space Odyssey” designs.”

Daedalus – A serious starship design

Daedalus was a serious design by the British Interplanetary Society, for an interstellar flyby mission that would reach Barnard’s Star in 50 years.

There’s some more info in this video I made:

Here’s a BIS page on the project:

http://www.bis-space.com/what-we-do/projects/project-daedalus

And another nice article by David Darling.

http://www.daviddarling.info/encyclopedia/D/Daedalus.html

Continue reading “Daedalus – A serious starship design”